Dowell Surface Grinders 
Automatic colum moving surface grinder with AND Operator Panel
Easy to operate LCD panel with full control of all three axis. Machine structure is manufactured from high quality “Meehanite” class FC cast iron. Direct type spindle uses high precision P4 bearings along with V3 grade spindle motor providing superior rigidity and stability.
Saddle guide ways use a double V designed, coated with Turcite-B and hand-scraped providing smooth movement. with an automatic forced lubrication system. All guide ways and ball screws use automatic forced lubrication. (Safety alarm detects oil supply is low).
Y and Z axis use precision ball screws
Y axis uses AC servo motor along with MPG (Manual Pulse Generator) to reach high feeding accuracy AND control: The operation modes are easy and simple for users to setup automatic grinding
Easy to operate LCD panel with full control of all three axis. Machine structure is manufactured from high quality “Meehanite” class FC cast iron. Direct type spindle uses high precision P4 bearings along with V3 grade spindle motor providing superior rigidity and stability.
Saddle guide ways use a double V designed, coated with Turcite-B and hand-scraped providing smooth movement. with an automatic forced lubrication system. All guide ways and ball screws use automatic forced lubrication. (Safety alarm detects oil supply is low).
Y and Z axis use precision ball screws
Y axis uses AC servo motor along with MPG (Manual Pulse Generator) to reach high feeding accuracy AND control: The operation modes are easy and simple for users to setup automatic grinding
| Model | DSG-2450 AND | DSG-2460 AND |
| Magnetic Chuck | 600 x 1200mm | 600 x 1500mm |
| Cross Feed | 675mm | 675mm |
| Table to Spindle Center | 600mm (opt. 700mm) | 600mm (opt. 700mm) |
| Cross Feed Graduations | 0.02mm | 0.02mm |
| Down Feed Graduations | 0.001mm / MPG | 0.001mm / MPG |
| Grinding Wheel | 406 x 50 x 127mm | 355 x 38 x 127mm |
| Spindle Speed | 1750 rpm | 1750 rpm |
| Spindle Drive Motor | 10-hp | 10-hp |
| Longitudinal Feed Rate | 3 ~ 25m / min | 3 ~ 25m / min |
| Hydraulic Motor | 5-hp | 5-hp |
| Cross Feed Rate | 1 ~ 20mm / min | 1 ~ 20mm / min |
| Cross Feed Motor | 1/4-hp Siemens | 1/4-hp Siemens |
| Down Feed Rate | 500mm / min | 500mm / min |
Specifications subject to change. Please contact us for more information.
GMSi Group is partnered with CIT Direct Capital for fast financing
through an automated online process. Our GMSi direct link to
CIT Direct Capital
Financing brings you to a simple-to-complete application – it will take you less
than 5 minutes! – and you can see what the payment terms and monthly payment will
be.
